page 13
Repositioning the safety harness
Repositioning the safety harness - shoulder straps
Repositioning the safety harness - waist straps
Note:
The shoulder strap retainers are located inside the backrest, and accessed by
unzipping the zip on the rear of the backrest.
(A) Feed the shoulder strap retainers from the rear of the seat through to the front of the seat.
(B) Thread the retainers back through to the rear of the seat at the desired setting.
(C) Ensure the straps are fitted correctly and securely, by pulling the straps up sharply.
WARNING: THE STRAPS CAN BE COMPLETELY REMOVED FROM THE PUSHCHAIR WHEN
ADJUSTING THE POSITION. PLEASE ENSURE THEY ARE SECURE BEFORE USE.
To reposition the waist harness from the
inner to the outermost position: Feel for
the “D” ring (A) through slot (1). Holding
the “D” ring, carefully pull the waist strap
through slot (1) whilst feeding the slider
and clip through slot (2).
Top Tip:
Angle the clip as shown in fig1.
feed the loop (D), followed by the rest of
the clip, through slot (2).
Feed slider (B) and clip (C) out through slot
(1) on the backrest.
WARNING:
Do not attempt to merely pull
the slider and clip out - they must be fed
through.
The shoulder straps and waist straps can be repositioned to suit the size of your child.
Use the shoulder straps in one of the three slots that are closest to your child’s shoulder
height and position the waist strap in one of the two slots that best suits your child’s
waist size. Adjust the crotch strap for a snug fit, ensuring your child is safely strapped in
and cannot slip out.
A
B
C
2
1
A
B
C
fig1
D
