My Child Echo (SAP), Инструкция по эксплуатации

Страница: 8 / 24

page 6
To operate the lock-off device: Pull down on tab (E) to open the locking device. Lift
up the latch (F). Pass the seatbelt under the latch and pull the belt tight (G). Close the
latch and fasten the tab (H) whilst holding the diagonal section of seatbelt tight.
E
F
Pull up lock (A) on the top right hand side of the shell and pull out the installation bar
(B) on the opposite side.
Tilt the seat shell forwards, feed the
seatbelt between the seat and the base
and plug the buckle in ensuring the
seatbelt is not twisted.
Push the child car seat back into the
passenger seat ensuring a good fit.
Thread the horizontal lap belt section
under both hooks (C) and remove all
the slack by pulling up on the diagonal
section of seatbelt. Thread the diagonal
section through the lock off device (D)
that is nearest to the seatbelt.
G
H
C
D
Installing for Group I [9-18kg]
(continued)
B
A