2
PLEASE READ THIS GUIDE CAREFULLY BEFORE INSTALLING BOOSTER
SEAT AND KEEP FOR FUTURE REFERENCE
• The booster seat
MUST
be fitted and used in accordance with
the manufacturer’s instructions. Incorrect installation could be
dangerous.
•
Warning!
Do not use any load bearing contact points other than
those specified in these instructions and marked on the child restraint.
•
UNDER NO CIRCUMSTANCES SHOULD ANY CHILD CAR SAFETY SEAT
BE USED ON A FRONT PASSENGER SEAT WITH AN ACTIVE AIRBAG.
• Car interiors can become very hot when left in direct sunlight. The
booster seat may become hot and should be covered up.
• Secure
ALL
heavy or loose objects in the vehicle as they could
cause injury to passengers in the event of an accident.
• In the event of an emergency, it is important that the child can be
released quickly as defined by British Standards. The car seat belt
is not fully tamperproof and you should discourage your child from
playing with the seat belt and buckle when in use.
• Take care not to damage the seat by trapping it in the doors or
under folding seats.
• If your car has a folding seat, ensure it is correctly locked upright.
• A child must
NEVER
be left unattended.
Safety
Notices
1. This is a “Universal” child restraint. It is approved to Regulation No.
44, 04 series of amendments, for general use in vehicles and it will fit
most, but not all, car seats.
2. A correct fit is likely if the vehicle manufacturer has declared in
the vehicle handbook that the vehicle is capable of accepting a
“Universal” child restraint for this age group.
3. This child restraint has been classified as “Universal” under more
stringent conditions than those which applied to earlier designs
which do not carry this notice.
4. If in doubt, consult either the child restraint manufacturer or the
retailer.
5. Only suitable if the approved vehicles are fitted with 3 point
safety-belts, approved to UN/ECE Regulation No. 16 or other
equivalent standards.
