M306 | Poly Blue Octave
4
Advanced Operation
ADJUST VOLUME LEVEL OF FUZZ EFFECT
To adjust the volume level of the fuzz effect, press and
hold the FUZZ switch until the blue LED flashes. Use the
DRY knob to set your desired fuzz volume, and then push
the FUZZ switch again to save the setting.
USE AN EXPRESSION PEDAL TO BLEND
BETWEEN TWO SETTING CONFIGURATIONS
An expression pedal such as the such as the DVP5
Volume (X)™8 Pedal can be used to toggle and sweep
between two different setting configurations. To set it up,
run a TRS cable from the expression pedal’s OUTPUT
jack to the M306’s EXP jack. Set rocker to its heel-
down position. Adjust knobs and switches as desired.
Move rocker to its toe-down position. Adjust knobs and
switches as desired to a different setting configuration.
Moving the rocker back and forth will transition smoothly
between the sounds created by the two settings.
USE A TAP SWITCH TO CONTROL FUZZ
AND MONO SWITCHES
An off-board tap switch such as the M199 MXR Tap
Tempo Switch can be used to control the FUZZ switch
and MONO switches. To set it up, run a standard patch
cable from the tap switch’s OUTPUT jack to the M306’s
EXP jack. To engage fuzz, press the tap switch once; to
disengage fuzz, press the tap switch twice. To engage
monophonic phase shifting, double tap the tap switch;
double tap again to disengage.