SAMPLE SETTINGS
M102
DYNA COMP
®
COMPRESSOR
DESCRIPTION
• In-line compressor “evens
out” your signal
• Especially useful for increased
sustain with stable dynamics
• Nashville studio standard
CONTROLS
OUTPUT knob controls overall
effect volume
SENSITIVITY knob sets
compression ratio
FOOTSWITCH toggles effect on/
bypass (red LED indicates on)
SPECIFICATIONS
Input Impedance
1 MΩ
Output Impedance
10 kΩ
Nominal Input Level
-5 dBV
Nominal Output Level
-12 dBV
Noise Floor*
95 dBV
T.H.D 0.2% Typ. at -20 dBV, 1 kHz
Max Compression
36 dB
Attack Time
5 ms
Release Time
1 s
Bypass
True Hardwire
Current Draw
3.3 mA
Power Supply
9 volts DC
*A-weighted
NASHVILLE
NASTY
BOTTLENECK
NEW WAVE SQUASH
DIRECTIONS
• Run a cable from your guitar
to the Dyna Comp’s INPUT jack
and run another cable from the
Dyna Comp’s OUTPUT jack to
your amplifier.
• Start with all controls at
12 o’clock.
• Turn the effect on by depressing
the footswitch.
• Rotate OUTPUT knob clockwise
to increase overall volume of
effect or counterclockwise to
decrease it.
• Rotate SENSITIVITY knob
clockwise to increase sensitivity
(more compression) or counter-
clockwise to decrease it (less
compression).
DUNLOP MANUFACTURING, INC.
P.O. BOX 846 BENICIA, CA 94510 U.S.A.
TEL: 1-707-745-2722 FAX: 1-707-745-2658
POWER
The Dyna Comp is powered by one
9-volt battery (remove bottom plate
to install), a 9-volt AC adapter such
as the Dunlop ECB003/ECB003E,
or a DC Brick
™
power supply
.