MXN HD7DMQ, Руководство пользователя

Страница: 9 / 20

9
Owner’s Manual
7" TFT DIGITAL LCD Moniter
The orange wire needs to be connected with the vehicle’s tacho signal and via MENU
the SPEED SWITCH needs to be selected ON . At FREQUENCY 67Hz setting(and
most common used tacho signal) the selected camera will be displayed during a
speed of 0~33km/h. Select the concerning camera via
『
UNDER FREQUENCY CH:
』
(At different type tacho signals the FREQUENCY needs to be adjusted into higher or
lower value than this example)
Over 33km/h(72Hz) the selected camera will be switched OFF automatically. When
the speed slows down, then the selected camera will be switched ON automatically
again at 30km/h. Instead of automatic switch OFF at a speed over 33km/h it is also
possible to activate another video source, such as a navigation picture from an
optional navigation computer. In this case user needs to select
『
OVER FREQUENCY
DISPLAY: ON
』
and user needs to select
『
OVER FREQUENCY CH:
』
In case of TRIGGER activation during
『
SPEED SWITCH ON
』
mode, then TRIGGERS
1~ 4 will overrule
『
SPEED SWITCH
』
function.
SPEED SWITCH
SPEED SW
SPEED SWITCH ON/OFF
FREQUENCY 67 Hz
UNDER FREQUENCY CAM CAM3/ CAM1~QUAD
OVER FREQUENCY DISPLAY
ON/OFF
OVER FREQUENCY CAM CAM1/ CAM2~QUAD