2
Figure 2: Connection Scheme
Number
A1
A2
LED
State USB
Bus state KNX TP
Note: Without connection to USB KSI-01U is not powered.
Colour
green
green
blinking green
red
<off>
blinking green
<off>
Explanation / Range
USB connection OK / No telegram traffic
KNX TP connection OK / No telegram traffic
Telegram traffic extent indicated by blinking
USB Suspend Mode
No USB connection
Telegram traffic extent indicated by blinking
KNX TP line not connected (or no USB connection)
1.2 LED Indication
1.3 Commissioning
Please note for commissioning with default settings:
● Physical address is 0.2.255
● After connection to USB, the device works with its default settings.
Please read carefully before first use:
●
The device may only be installed and put into operation by a qualified electrician or
●
For planning and construction of electric installations the appropriate specifications,
●
Connect the KNX bus line as for common KNX bus connections with a KNX bus cable,
●
Do not damage electrical insulations during connecting.
●
.
Installation only in dry locations
●
.
Accessibility of the device for operation and visual inspection must be provided
●
.
For changing the configuration use the ETS
●
.
The housing must not be opened
●
For mounting use an appropriate equipment according to IEC60715.
●
Installation on a 35 mm DIN rail (TH35).
●
Warning: Do not connect to 230 V. The device is supplied by USB and does not require
any additional external power supply.
authorized personnel.
guidelines and regulations in force of the respective country have to be complied.
to be stripped and plugged into a KNX TP connector.
Table 2: LEDs Colours
USB
To the personal
KSI-01U
KNX cable
computer USB port
(
Type A)
To the
USB cable is
not included
in the industrial
package
interface
(
)
Type B
Personal Computer
KNX
Device
+
-
ETS
