6
M1.1.CAT30DP.NLFREN 21062018
EN
WARNING!
Never use a hydraulic jack as a stand alone support device. After lifting, immediately support the
lifted vehicle with appropriately rated jack stands!
1 General information
• Only authorised persons should operate the jack after carefully reading and understanding the contents of this manual.
• Do not modify the jack in anyway.
• The manufacturer accepts no responsibility for the improper use of the jack.
2 Safety instructions
1. Lifting device only, not for supporting the load. After lifting, support the vehicle with rated jack stand before working.
2. Never exceed the rated capacity of the jack.
3. Use only on hard, level ground. Use chocks as appropriate.
4. Ensure there are no persons inside the vehicle to be lifted before operating the jack.
5. Never work under a raised vehicle without previously supporting it with jack stands.
6. Never place any portion of your body under the vehicle when lifting of lowering.
7. Refer to the vehicle manufacturer owner’s manual to locate approved lifting points on the vehicle. Center jack saddle under
lifting point.
8. If the jack functions irregularly, discontinue use until professionally inspected and repaired.
3 Technical specifications
Model
CAT30DP
Capacity
3 ton
Lifting height minimum
95 mm
Lifting height maximum
505 mm
Net weight
41 kg
Dimensions (l x w x h)
720 x 308 x 1195 mm
4 Assembly
1.
Assemble the 2 pieces of the handle with bolt and fixed T shape handle with screw supplied.
2. Insert handle into the handle socket. Tighten the bolt on handle socket to prevent accidental removal of handle while in use.
Step 1
Step 2
copyrighted
document
- all
rights
reserved
by
FBC
