4 / 21
ALFA series
Model:
ALFA 12K WIFI, ALFA 18K WIFI, ALFA 24K WIFI
ALFA-user manual-EN-R1 29.06.2020
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
Obrázek nejde
zobrazit.
2.
S
AFETY RULES
•
Read this guide before installing and using the
appliance.
•
Make sure the base of the outdoor unit is firmly and
securely mounted.
•
After installing the kit air conditioner, test cycle and
save operational data.
•
Check that the outlet is properly grounded, change it
in any case.
•
When working on terminals, all power circuits must
be disconnected from the power supply.
•
Children must not have access to the assembly area
when installing indoor or outdoor units.
•
The indoor unit of the air conditioner must be
protected against various types of overvoltage by a
safe device.
•
The ratings of the fuse installed in the built in control
unit ate T 5A / 250V.
•
The air conditioner must be installed by professional
or qualified persons.
•
Check that the system is airtight and that there is no
air or refrigerant in it.
•
Make sure that the mains voltage corresponds to the
voltage on the type plate of the device. Keep the plug
and cables clean. The power plug must be properly
inserted into the socket, it should be firmly pressed
into the socket to avoid the risk of electric shock or
fire.
•
Cleaning and maintenance requires the use of
qualified persons. Before proceeding, first disconnect
the device from the power supply.
•
The appliance must be fitted with means for
disconnection from the supply mains having a contact
separation in all poles that provide full disconnection
under overvoltage category III condtions, and these
means must be incorporated in the fixed wiring in
accordance with the wiring rules.
Do not install the device near flammable substances (alcohol
etc.) or pressure containers (e.g. aerosol cans).
•
If the unit is to be installed in a non-ventilated area,
appropriate precautions should be taken to prevent
refrigerant leakage into the environment that could
cause a fire.
•
The packaging materials are recyclable and should be
disposed of in the separate waste bins. Take the air
conditioner at the end of its useful lige to a special
waste collection centre for disposal.
Air conditioners should only be used in accordance with the
operating instructions. This manual covers all possible
conditions and situations that may occur.
•
Never install the air conditioner yourself, always
contact specialized technical personnel.
•
The air conditioner flap, responsible for the direction
of air flow (shutter), in heating devices must be
armed down, and during cooling mode - up.
•
The air conditioner should always be set to the most
suitable temperature for the prevailing climatic
conditions.
•
The batteries in the remote control should be
disposed of in a suitable container with recycling
materials.