background image

1/4

Filename: Man_AX-S_C13N_GB.PMD 14/01/11

AX-S 13G
AX-S C13/N
C33F/N

INSTALLATION
MAINTENANCE

INSTALLATION

UNPACKING

Immediately after unpacking the slicer, check it for possible shipping damage. If you find the machine
damaged after unpacking, save the packing material and contact the carrier within 15 days from
delivery.

Before installation, test the electrical service to assure that it fits with the specifications on the machine
data plate   

   .

ELECTRICAL

Warning: 

THIS MACHINE IS PROVIDED WITH THIS PLUG                  . IT MUST BE CONNECTED

TO PROPER GROUND PLUG, GROUNDED OUTLET. IF THERE IS NO GROUND PLUG, CONTACT
AN ELECTRICIAN.

CLEANING

This machine must be thoroughly cleaned and sanitized after installation and before being put into
service.

SAFETY

SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR
CORRECT OPERATING POSITIONS ANYTIME THE SLICER IS IN USE.

The 

blade cover 

   

6

      must be in position over the knife and secured by tightening the hand knob.   

7

The 

Iast slice device   4     

must be used when slicing, it keeps your hands away from the knife.

SLICER

GB

Содержание Axis AX-S 13G

Страница 1: ...machine data plate 1 ELECTRICAL Warning THIS MACHINE IS PROVIDED WITH THIS PLUG IT MUST BE CONNECTED TO PROPER GROUND PLUG GROUNDED OUTLET IF THERE IS NO GROUND PLUG CONTACT AN ELECTRICIAN CLEANING This machine must be thoroughly cleaned and sanitized after installation and before being put into service SAFETY SAFETY DEVICES INCORPORATED IN THIS SLICER MUST BE IN THEIR CORRECT OPERATING POSITIONSA...

Страница 2: ...r is not running the slicer thickness control 2 must be set on zero fuIly clockwise to cover the blade edge Always UNPLUG the power cord before cleaning or moving the slicer SLICING PuII the product holder 3 towards you until it stops and place the product to be sliced on the product holder tray Lay the last slice device against the product and on the slicer switch press the pushbutton green or re...

Страница 3: ...er device Push the green button to start the machine Sharpening Press the sharpening wheel for about 10 15 seconds then press simultaneously also the grinding stone for two seconds Contemporaneously loosen the two grindstones After sharpening press the red stop pushbutton MAINTENANCE Attention Use protection gloves BLADE SHARPENING Your slicer blade will provide long service in normal deli food st...

Страница 4: ...ness control fully counterclockwise when lubricating this slide rod and then turn it fully clockwise when finished DO NOT lubricate the rod on which the last slice device slides It must be kept clean but not lubricated The motor has sealed bearings and requires no lubrication maintenance WEAR ADJUSTMENT After several years of operation and many sharpenings of theblade it may become necessary to hav...

Отзывы: