Mvix PLB-42, Руководство по монтажу

Страница: 2 / 16

WARNING!
● Do not begin the installation until you have read and understood all the instructions and warnings
contained in this installation document. If you have any questions regarding any of these instructions or
warnings, please contact Mvix Technical Support.
●
This mounting bracket was designed to be installed and used ONLY as specified in this manual.
Improper installation of this product may cause damage or serious injury.
●
This product should only be installed by someone who has good mechanical sense, basic
building/construction experience, and who fully understands this manual.
●
Make sure that the supporting surface will safely support the combined weight of the equipment and all
attached hardware and components.
●
If mounting to a wooden joist, make sure that the mounting screws are anchored into the center of the
studs. The use of a stud finder is highly recommended.
●
Always use an assistant or mechanical lifting equipment to safely lift and position equipment.
● Tighten screws firmly, but do not over tighten. Overtightening can cause damage to the screws or
screw holes, greatly reducing their ability to hold the load.
● This product is intended for indoor use only. Using this product outdoors could lead to product failure
and personal injury.
Component Checklist
Important:​ Please inventory the package contents to ensure you have all the proper parts, as listed below. If
anything is missing or damaged, please contact Mvix Customer Service for a replacement.
For 32” displays:
866.310.4923 ​www.mvixusa.com