4. Join the net support tubes tubes (1) in two
pairs, using the net support tube connectors
(4), as illustrated.
5. Fit each net support tube assembly by inserting one
end into the hole in the elbow on the back cross bar.
Carefully bend the tube towards the top cross bar and
insert into the hole in the elbow. Make sure that the
tube is pushed fully home into the elbows.
6. Apply Kickmaster
sticker before attaching
the net to the frame.
7. Spread the net over
the goal assembly
and fasten in place
using the net
securing clips (6).
Suggested
pegging points
Kickmaster sticker
4
6
1
Thicker section
on outside of
bend
Securing Frame
Fix the frame to the ground using 4 pegs (7). Position around the frame base as illustrated.
Secure pegs using a mallet.
CAUTION:
Check regularly that pegs are secure. Loose pegs may cause injury.
Care should be taken when using a mallet as misuse may cause injury.
CAUTION:
When assembled the goal is under tension.
Extreme care must be take when disassembling.
Check frame regularly to ensure tube frame toggles and net ties are secure.