Step 1.
To start the Glideboard, press the power
switch. Check the battery level on the display
panel. Battery level will be indicated in the display
panel. Low battery will be shown by a red display.
If low battery level is shown, recharge the battery
before use.
Step 2.
Before each ride, gently step on one of the
footplates to check the working condition. Note –
do not apply more than light pressure as the Glide-
board may move suddenly. If a green signal is
shown in the display panel, continue use. If a red
signal is shown, cease use and attempt trouble-
shooting. Continue to use once normal working
signal resumes.
Step 3.
To ride the Glideboard, place one foot onto
the board followed briskly by the other. It is recom-
mended that riders support themselves whilst
mounting the board. Balance before moving and
USING THE GLIDEBOARD:
Page 10
ensure that you can stand still on the board.
Step 4.
To move forward, lean forward slightly
which will naturally apply pressure through the
pedals.
Step 5.
To reverse, apply pressure gently to the
pedals through your heels.
Step 6.
To turn left and right, apply pressure gently
to the required pedal whilst keeping opposite the
pedal level
Step 7.
To slow down and stop, slowly assume a
full upright position and keep the pedals level.
Step 8.
To dismount, come to a complete stop. It
is recommended that riders support themselves
whilst dismounting. Step backwards off the board
with one foot briskly followed by the other.
Riding Instructions
Содержание Electrick IO Glideboard
Страница 1: ......
Страница 3: ...1 2 Page 2 CONTENTS...
