manualshive.com logo in svg

MV Agusta 2005 F4 BRUTALE 910 S, Руководство пользователя

Поделиться
Скачать
MV Agusta 2005 F4 BRUTALE 910 S Скачать руководство пользователя страница 25

- 23 -

SAFETY INFORMATION

2

2

2. The use of the vehicle after such device or ele-

ment of design has been removed or rendered
inoperative.

Acts presumed to constitute tampering include:
1. The removal or piercing of the exhaust

silencer, the diaphragm, the manifolds, or any
other components involved in the transmission
of exhaust gases.

2. The removal or piercing of any part of the

intake system.

3. Poor maintenance.
4. The replacement of any movable parts of the

vehicle or of any intake or exhaust compo-
nents with parts or components other than
those prescribed by the manufacturer.

NOTE
Never ride your motorcycle with a defective muf-
fler. This will effect not only the motorcycle’s
sound level, but its performance as well. Riding
with a defective muffler can also subject you to
arrest and imposition of fines.
The rules of the road vary from country to country.
Be sure that you understand local regulations
before riding your motorcycle.

Содержание 2005 F4 BRUTALE 910 S




































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды