MuxMeet Videobar Operation Manual
MuxLab © 2022 14 94-000974-A/SE-000974-A
12.
Maintenance
Camera Maintenance
If the camera is not use in long-term, please disconnect the power after use.
Use a soft cloth or cotton paper to remove dust from the camera housing.
When cleaning the camera lens, please use a dry soft cloth made for this purpose. If the
amount of dirt is more serious, then use a neutral cleaner as well.
Do not use strong or corrosive detergent, so as not to scratch or damage the lens and affect the
image quality.
Avoid Using
The camera should avoid shooting particularly bright objects, such as sunlight.
The camera should not work under unstable lighting conditions, otherwise the image will
flash.
Do not use around facilities that can transmit high-power radio waves, such as television
stations or radio-transmitting stations.
13.
Troubleshooting
The following table describes some of the symptoms and possible solutions regarding the MuxMeet
Videobar.
symptom
Probable cause
Possible solution
No Image
•
No power or wrong power
supply
•
HDMI or USB-C cable
Check power connections
Check the HDMI and USB-C
cables
Flickering Image
•
Synchronization
Check the HDMI and USB-C
Cables
