© MuxLab.
LongReach II Active CCTV Receiver Hub Installation Guide
Page 10
3.
Installation Procedure
3.1.
Pre-Installation Checklist
The LongReach II Active CCTV Receiver Hub (500126,
500127) is used to provide extended distance via a
copper twisted pair. Before installing the product, please
verify the following checklist to ensure that installation
takes place smoothly.
1.
The LongReach II Hub is always connected to the
receiver side of a CCTV installation. For example, it
is connected directly to the video input ports of the
CCTV DVR, IP encoder or matrix switcher at the
central monitoring location.
2.
The LongReach II Hub is used in conjunction with
MuxLab’s passive CCTV baluns (i.e.: 500009,
500022, 500024/29). The passive CCTV Balun is
connected at the CCTV source, which is usually the
CCTV camera.
3.
For best image quality and operator safety, the DVR
should be properly grounded. If this is not possible,
then the LongReach II Hub should be properly
grounded. Please ensure that there is a building
ground available. Note: If more than one LongReach
II Hub is connected to the same DVR, only one hub
needs to be properly grounded.
