HDMI 2.0/3G-SDI Signal Analyzer
© MuxLab Inc. 2017 94-000851-A / SE-000851-A Page 14
7.
Control the Signal Analyzer from a PC via RS232 or USB.
a)
Main menu (on left):
The main menu is located on the left portion of the
screen, which allows for, serial port selection, which
includes a sophisticated “Auto Search Machine”
function, “Address Management” function, “Input port
On/Off, and information via OSD showing video and
audio parameters.
Note:
The Search Machine is a very useful function.
With a single click of this button, software will search
the Signal Analyzer from COM1 to COM30 (com port
number must be 1~30) based on the selected address
on the “Address select” pull down menu. If just one
device is connected to the Control chain, you don’t
need to set the address, because the default
broadcast mode address 0000 will work well in this
case.
