MuxLab 500830, Руководство по установке и эксплуатации

Страница: 19 / 24

HDMI 2.0/3G-SDI Signal Generator
© MuxLab Inc. 2017 94-000850-A / SE-000850-A Page 19
g) Device address management menu:
The Signal Generator can be used to set up a large test system.
All Signal Generators and Signal Analyzers in a system can be
cascaded by using the RS232 (3 pin) Phoenix connector. When
more than one Signal Generator is connected on a single serial
chain (Bus), these devices must have unique (different)
identification address.
Each address can have a binding note, which has at most 10
characters. After the address table is saved, they it can be
selected via the address selector on the main menu.