background image

© MuxLab Inc. 

6G-SDI Extender Over UTP 

 

Page 29 

8. 

Product Warranty Policy 

Items Under Warranty - Company Policy 

MuxLab  guarantees  its  products  to  be  free  of  defects  in  manufacturing  and  workmanship  for  the 
warranty  period  from  the  date  of  purchase.  If  this  product  fails  to  give  satisfactory  performance 
during  this  warranty  period,  MuxLab  will  either  repair  or  replace  this  product  at  no  additional 
charge,  except  as  set  forth  below.  Repair  and  replacement  parts  will  be  furnished  on  an  exchange 
basis and  will be  either reconditioned or  new.  All replaced parts and products become the property 
of  MuxLab.  This  limited  warranty  does  not  include  repair  services  for  damage  to  the  product 
resulting  from  accident,  disaster,  misuse,  abuse,  or  unauthorized  modifications  or  normal  decay  of 
battery driven devices. Batteries, if included with the product, are not covered under this warranty.  

Limited warranty service can be obtained by delivering the product during the warranty period to the 
authorized  MuxLab  dealer  from  whom  you  purchased  the  product,  or  by  sending  it  to  MuxLab. 
MuxLab will not accept any such product for repair without a Return Material Authorization number 
(RMA#) issued  by its Customer Service Department and a proof of purchase date. If this product is 
delivered  to  MuxLab  by  mail,  you  agree  to  assume  risk  of  loss  or  damage  in  transit,  to  prepay 
shipping  charges  to  the  warranty  service  location,  and  to  use  the  original  shipping  container  or 
equivalent. 

THE  ABOVE  LIMITED  WARRANTY  IS  THE  ONLY  WARRANTY  COVERING  YOUR 
MUXLAB  PRODUCT.  THERE  ARE  NO  OTHER  WARRANTIES,  EXPRESSED  OR  IMPLIED, 
INCLUDING  WARRANTIES  OF  MERCHANTABILITY  OR  FITNESS  FOR  A  PARTICULAR 
PURPOSE.  SOME  STATES  DO  NOT  ALLOW  LIMITATIONS  ON  IMPLIED  WARRANTIES, 
SO THE ABOVE LIMITATION MAY NOT APPLY TO YOU. 

IF THIS PRODUCT IS NOT IN GOOD WORKING ORDER, YOUR SOLE REMEDY SHALL BE 
REPAIR  OR  REPLACEMENT  AS  PROVIDED  FOR  ABOVE.  IN  NO  EVENT  SHALL  MuxLab 
BE  LIABLE  TO  YOU  FOR  ANY  DAMAGES,  INCLUDING  ANY  LOSS  OF  PROFITS,  LOST 
SAVINGS, OR OTHER  INCIDENTAL OR  CONSEQUENTIAL  DAMAGES  ARISING OUT OF 
THE  USE  OF  OR  INABILITY  TO  USE  THIS  PRODUCT,  EVEN  IF  MUXLAB  OR  AN 
AUTHORIZED  MuxLab  DEALER  HAS  BEEN  ADVISED  OF  THE  POSSIBILITY  OF  SUCH 
DAMAGES; NOR WILL MUXLAB BE LIABLE FOR ANY CLAIM BY ANY OTHER PARTY. 
SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR 
CONSEQUENTIAL  DAMAGES  FOR  CONSUMER  PRODUCTS,  SO  THE  ABOVE 
LIMITATIONS  OR  EXCLUSIONS  MAY  NOT  APPLY  TO  YOU.  THIS  WARRANTY  GIVES 
YOU  SPECIFIC  LEGAL  RIGHTS.  YOU  MAY  ALSO  HAVE  OTHER  RIGHTS  WHICH  MAY 
VARY FROM STATE TO STATE. 

Содержание 500730
































Отзывы: