HDMI 8x8 Matrix Switch Kit, HDBT, PoC, 4K/60
Installation & Operation Manual
© MuxLab Inc. 2019
12
System Operations
5.1. Front Panel Button Control
The HDMI 8x8 Matrix Switch can be controlled via the front panel. Please follow the
basic programing instructions below:
1. To connect one input to an output:
Example: Input 1 to Output 3
→ Press the Output 3 button until the Input 1 LED is ON
2. To connect one input to several outputs:
Example: Connect Input 2 to Output 3 and 4
→ Press the Output 3 button until the Input 2 LED is ON
→ Press the Output 4 button until the Input 2 LED is ON
3. To connect an input to all the outputs:
Example: Input 1 to all Outputs
→ Press the Output 1 button until the Input 1 LED is ON
→ Press the Output 2 button until the Input 1 LED is ON
→ Press the Output 3 button until the Input 1 LED is ON
→ Press the Output 4 button until the Input 1 LED is ON
Note:
LED
Indicators of the pressed buttons above will blink green for three times if
the connections were completed successfully, then the LED will switch OFF. If the
connection failed, they the LEDs will turn OFF immediately.
