© MuxLab Inc.
Active VGA Managed Receiver Installation Guide
Page 13
3.4. Physical
Installation
MuxLab’s Active VGA Receiver can be physically
installed anywhere near a display device. Typically, the
Receive is attached to the back of a display device’s
mounting system via threaded fasteners and/or tie-
wraps.
Figure 4 demonstrates a typical installation. The
Receiver is attached to the mounting system of a large-
screen monitor via threaded fasteners (not included):
Four (4) #6-32 screws, four (4) #6 lock washers, and
four (4) #6-32 nuts (not shown).
Figure 4: Typical Installation
