-4-
CS3007-03
5.
Finishing daily maintenance
2
1
Press the [Enter] key on the operation panel.
The printer automatically performs the Short
cleaning.
When the Short cleaning is complete, the printer
automatically enters to sleep mode.
Do not reuse a cleaning stick.
Dusts can adhere causing damage to the print head.
Check that the lid of the maintenance cleaner is shut properly and store it.
Important!
Daily Maint. :
End
Dispose of the used cleaning stick.
Use a paper towel to wipe the maintenance cleaner off the dropper.
Dispose of the maintenance cleaner in the plastic cup and dry the cup well using the paper
towel.
Use a paper towel to clean the tray.
Now the daily maintenance is complete.
For purchasing the maintenance items, contact your local Mutoh dealer or
nearest Mutoh sales office.
Note
VJ-ULVA1-ML500
Dedicated Maintenance cleaner
Part Number
Name
Minimum q’ty per order
PJ-POLYNITW
Polyester knit wiper
RH2 Clean stick
Clean stick
1
300
100
<Preparations>
Make sure that there is enough ink in ink cartridges.
Empty the waste fluid tank.
Perform “Daily maintenance
(refer to
this sheet
)
”.
To leave the printer in sleep mode for one week or longer, when one week has
passed, perform the following:
<When the printer has been left in sleep mode for one week>
Operation manual ”
Emptying waste ink tank
”
Operation manual ”
Checking ink level and replacing ink cartridge
”
Check the ink level.
If “Ink Low” is displayed, replace the relevant ink cartridge.
Agitate the ink in the ink cartridge.
Maintenance before leaving printer in sleep mode for a long time
