-4-
CS3013-01
Check that the area around the print head is clean.
Attach maintenance cover on the left side of the printer and close it.
Next end the daily maintenance.
4
5.
End the daily maintenance
2
1
Important!
Daily Maint.:
End
Press the [Enter] key on the operation panel.
The carriage moves to the original position.
The printer automatically enters to sleep mode.
Put the cleaning stick back in the maintenance cleaner
in the cup to store.
Clean off the maintenance cleaner from the dropper
with paper towel.
Now the daily maintenance is complete.
Using plastic bag or wrap, put it over the maintenance cleaner in
the cup to keep out dust.
Check that the lid of the maintenance cleaner is shut properly
and store it.
Please contact your local Mutoh dealer or nearest Mutoh sales office for ordering
maintenance parts.
Note
MP31-CL1000B
Dedicated Maintenance cleaner
Part Number
Name
Minimum q’ty per order
PJ-POLYNITW
Polyester knit wiper
RH2 Clean stick
Clean stick
1
300
100
When not using the printer for long periods (longer than 24 hours)
If you are not using the printer for longer than 24 hours:
Follow the instructions on this sheet to perform daily maintenance and
then put the printer into sleep mode.
If you are not using the printer for over 2 weeks:
Perform “Long Storage”.
In any of above cases, follow the steps below to perform daily maintenance
once a week.
<Maintenance steps>
Invert the ink bags back and forth to agitate ink.
Wake the printer from sleep mode.
(The printer will automatically perform “Little Charge”)
Perform a nozzle check to see if there are no nozzle missing.
Follow the steps on this sheet to perform daily maintenance,
and put the printer into sleep mode.
5
Operation manual ”
Long Storage and Initial Charge
”