June 2017
VJ1617HE-A-01d
1
MUTOH INDUSTRIES LTD.
Some contents of the Operation Manual are changed. Please see the following list.
The content of this documents are being based on the firmware version later than Ver.1.09.
Chapter Item
Description
Revision
History
Chapter
3
3.3 Sleep mode “TIP” reads:
The cleaning mode reflects the settings in Operation panel.
6.5.3 Head cleaning
should read:
The cleaning type can be selected in the Sleep mode setting
flow.
01a
3.5.6 Setting
media type
“NOTE” in Step 5 reads:
No keys on the operation panel are pressed for 10 seconds.
should read:
No keys on the operation panel are pressed for 30 seconds.
01a
3.3.1 Set sleep
mode on the
printer
Sleep mode menu reads:
“Sleep Mode2: Start”
should read:
“SleepMode2: SetType”
Press the [Enter] key and select the cleaning type from:
“Cleaning Type: Short”
“Cleaning Type: Normal”
“Cleaning Type: Long”
Press the [Enter] key to set the selection.
To start the Sleep mode, select “SleepMode3: Start” and press the
[Enter] key.
01a
3.6.1 Nozzle
check
The printer information (date and time of printing, printer’s serial
number, firmware version) is printed on the nozzle check pattern.
01d
Chapter
4
4.2.6 Head
height
adjustment
Changed the menu name of "Thickness Ajst." displayed on the
operation panel.
"**>6: Thickness Ajst."
should read:
"**>6: Thickness Adj."
01c
4.2.7 Media feed
compensation
Refer to sheet 4
01c
4.4.7
Normal
Display while
Printing
Refer to sheet 4
01c
VJ-1617H OPERATION MANUAL ERRATA
