MUTOH ValueJet VJ1324X Скачать руководство пользователя страница 171

Страница: 171 / 264

VJ-1324X OPERATION MANUAL

Panel setup menu

5.1 Setup menu

171

5.1.16.1 SmartChip menu

NOTE

• To display the various information of Smart chips, use genuine ink and S/C cards.

If ink other than genuine ink is used, the ink status will not be displayed correctly.

5.1.17 Roll Length menu

Sets up the roll media length.

Setup item

Setting

Description

KCMY

0 to 100 (unit: %)

The amount of ink remaining in each ink cartridge of K/C/M/
Y is displayed.

• If it is blinking at 10%, smartchip recovery is being

performed on the corresponding ink cartridge.

7.4 Smartchip Recovery

—

• [Cancel] key: shifts to the previous menu.

5.1 Setup menu

Setup item

Setting

Description

Roll media

<Off>

Roll Length is not used.

• [Enter] key: saves the setting and shifts to the previous

menu.

5.1 Setup menu

Roll1

Sets up the roll media length.
The set values of the roll media length can be set as “Roll1” to
“Roll3”.

• [Enter] key: saves the setting and shifts to the sub menu.

5.1.17 Roll Length menu

Roll2

Roll3

—

• [Cancel] key: cancels the setting and shifts to the previous

menu.

5.1 Setup menu

Содержание ValueJet VJ1324X









































































































































































































































































Результаты поиска

Содержание ValueJet VJ1324X

Отзывы:

MUTOH ValueJet VJ1324X, Руководство по эксплуатации, Страница: 171 / 264

Результаты поиска

Содержание ValueJet VJ1324X

Отзывы: