MUTOH ValueJet VJ1324X Скачать руководство пользователя страница 196

Страница: 196 / 264

Maintenance

VJ-1324X OPERATION MANUAL

196

6.1 Replacing consumable components

NOTE

• Do not share the ink cartridge once installed with another printer. The cartridge will not be usable

from that time onward.

• Do not give ink cartridges or ink bags strong shakes.

Doing so may cause ink leakage.

• Do not disassemble ink cartridges.

A disassembled ink cartridge or ink bags cannot be used.

• When an ink cartridge or ink bag is moved from a cold place to warm place, keep the ink cartridge

for 3 hours or more in the new printing environment before printing.

• Do not refill an ink cartridge or ink bag with ink.

It may result in abnormal printing.

• Insert or remove the ink cartridge and high capacity pack adapter at the time of replacement only.

Inserting or removing the ink cartridge and high capacity pack adapter except at the time of
replacement may result in incorrect printing.

(1) Replacing 220ml ink cartridges

1. Confirm that the printer is turned ON.

NOTE

• Do not replace ink cartridges when the printer is turned OFF.

The remaining ink may not be detected correctly, causing abnormal printing.

2. Remove the ink cartridge that you want to replace from the slot.

No.

Name

Ink cartridge

Ink cartridge slots

Содержание ValueJet VJ1324X









































































































































































































































































Результаты поиска

Содержание ValueJet VJ1324X

Отзывы:

MUTOH ValueJet VJ1324X, Руководство по эксплуатации, Страница: 196 / 264

Результаты поиска

Содержание ValueJet VJ1324X

Отзывы: