VJ-1204 INSTALLATION MANUAL
3
VJ1204E-I-00
3
2
4
1
2
1
2
1
1
3
1
4
2
2
4
4
3
1
1
2
1
2
1
1
3
4
3
2
4
1
2
3 Assembling
Procedures for assembling this product are explained.
Make sure to unpack this product with
three persons or more.
3.1 The stand assembling procedure
If you will use the stand, assemble it in accordance
with the following steps.
1. Follow the steps shown below to assemble the
right side of the stand.
a. Attach the right support to the caster section.
b. Fasten two hexagon socket head cap screws
with the enclosed hexagonal wrench.
2. Assemble the left side of the stand in a similar
way to step 1.
3. Follow the steps shown below to attach the cen-
tral beam to the legs (left, right).
a. Attach the central beam and four hexagon socket
head cap screws to the stand (the left, the right).
b. Fasten the hexagon socket head cap screws with
the enclosed hexagonal wrench, and fasten the
central beam.
4. Attach the book holder to the right side of the stand.
5. Confirm that each component is fastened firmly
by gently shaking the stand.
3.2 Assembling the stand
Attach the stand to the printer in accordance with the
following steps.
1. Lock two casters on the front side.
2. Hold the following positions when lifting the prod-
uct.
Panel side:
two grips under the product
Opposed side:two rubber grips under the product
Make sure to hold the specified positions when lift-
ing the product.
This prevents the product from being fallen and
broken.
Do not hold the media guide. This may affect the
accuracy and correct operation of the product.
3. Place the product on the stand so that the rear rub-
ber leg tips fit into the holes on the stand.
4. Attach two butterfly bolts to the stand.
5. Secure the plotter to the stand by bolting the butter-
fly bolts.
This completes assembling of the stand.
3.3 Detaching protective materials
This product has protective materials in the place
shown below.
Detach all protective materials in accordance with the
following steps.
1. Remove all tapes from each cover.
2. Open the front cover and unscrew the butterfly
screws, and detach the fixing head unit protective
materials (metal plate).
This completes detaching protective materials.
No.
Name
4 Hexagon socket head cap
screws
No.
Name
1
Right support
2
Caster lock
3
Caster section
No.
Name
4 Hexagon socket head cap
screws
No.
Name
1
Left support
2
Caster lock
3
Caster section
No.
Name
4 Hexagon socket head cap
screws
No.
Name
1
Central beam
2
Leg (left)
3
Leg (right)
No.
Name
1
Leg (right)
No.
Name
2
Book holder
No.
Name
1
Butterfly bolts
No.
Name
1
Casters
No.
Name
2
Caster locks
No.
Name
1 Fixing head unit protective
materials (metal plate)
No.
Name
2
Butterfly screw
No.
Name
1
Printer main body
No.
Name
2
Holes on the stand
No.
Name
1
Grips
2
Rubber grips
No.
Name
3
Rubber leg tips
4
Media guide
CAUTION
NOTE
