muth Signal 210-0133-0, Инструкция по установке

Страница: 3 / 9

Page 3
1) Start with opening the driver’s side door and
lowering the window. Remove lock lever (1A).
2) Using a plastic pry bar [slotted screwdriver],
slowly pry plastic cover to reveal screw. CAU-
TION: These plastic covers are fragile and
break easily. Be very gentle in disengaging
them.
3) Remove screw with a 10mm socket.
4) Slowly pry plastic cover using a plastic pry bar
[slotted screwdriver].
5) Remove the (2) revealed screws with a 10mm
socket.
6) Pry off the door panel controller using a plastic
pry bar. Disconnect wiring and remove the
controller.
7) With the plastic pry bar, pry around the trian-
gular panel as shown.
8) Lift up and slowly pull door panel out partial-
ly.
9) Release the door lever rod with a needle nose
pliers. Remove and set door panel aside.
1
2
3
5
4
6
7
8
Door Panel Removal
1A
9