MuteDesign Duo 12, Руководство по установке

Страница: 16 / 20

16
Duo 12 - Installation instructions | Conditions for use
Fit the corner tube in such a way that the bottom of the tube rests on the block located in the angle bracket.
Slide the fourth panel on as in the diagram above.
5
5
3
4
2
2 4 3
3
Screw on the internal angle bracket using two M6 screws . Then attach the internal bracket with the block
in the bottom part using two M6 screws . Repeat for the other side.
Important! It is important that the block is located close to the surface.