Mutec Smart Clock MC-3, Руководство по эксплуатации

Страница: 9 / 20

> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
88
\
B E D I E N E L E M E N T E
B E D I E N E L E M E N T E
B E D I E N E L E M E N T E
> > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > > >
Manual SDs-01 D 3.2.2003 17:45 Uhr Seite 3
CONTROL ELEMENTS AND TERMINALS
MC-3 SMART CLOCK Front Panel
1 POWER
This red LED lights up when the unit is switched on with the rear panel
POWER switch (on condition that the adjusted voltage matches your local
voltage).
2 MENU
Use this key to access the different functional menus.
3 SELECT
Use this key to select a function from a specific functional menu.
4 CLK
BASIS
This functional menu enables the setting of the base clock rate between
32.0kHz and 192.0kHz.
5 CLK
MULTIPLIERS
This functional menu lets you determine the factor by which the basis
clock rate is multiplied additionally. This setting can be made individually
for every Word Clock pair of outputs as well as for the AES/EBU and S/PDIF
outputs.
6 WCLK OUT 4
This pair of Word Clock outputs transfers either all standard Word Clock
rates as well as Word Clock x 256 for older digidesign ProTools™ systems.
Their numbering is aligned to the corresponding functional menu on the
front panel. For adjusting these outputs see chapter OPERATION.
MC-3.1 SMART CLOCK SD Front Panel
Refer to the OPERATIONS chapter for more
information.
9
Basis operation of MC-3.1 SMART CLOCK SD is aligned to this one of
previously described MC-3.
1 SD
VIDEO
Within this functional area the standard definition video sync reference
generator can be set to output PAL, NTSC or NTSC black + white.
2 SD
FORMAT
Use this key to change the output format of the selected video sync refer-
ence signal between Black +Burst, composite sync and color bar.
For detailed specifications on all terminals,
refer to the »Pin Assignment of the
Connectors« and »Technical Data« in the
chapter APPENDIX.
6 4 3 2 5 1
2 1