Mutant Harmony MTHA4, Руководство пользователя

Страница: 11 / 16

For more information about car audio visit our website at
is a brand name of Armour Automotive Ltd.
For more information about car audio visit our website at
is a brand name of Armour Automotive Ltd.
:
• Check connections on speaker are good and connections at source are
good.
• Make sure gain or volume is turned up. Check that none of the
speaker wires are shorted or pinched behind a panel or trim. Check all
connections at crossover especially the tweeter level input connections.
• Check that gain levels are correct at all amplifiers and processors. Also
check that crossover points are correct.
• Also check that the speaker wires are not shorted or touching any bare
metal.
:
• The speaker may have been damaged due to incorrect mounting or may
have been driven by to small an amplifier causing a clipped signal to be
sent to the speaker which may have damaged the voice coil.
• Check that all speakers are wired ‘in phase’. This means that all positive
wires go to all positive speaker terminals and the same for negative.