The symptoms of a miscalibration are the following:
The bagraphs display inaccurate values - for example a LED is lit when you monitor a silent channel.
There is some faint signal (“bleed”) even if the level of a channel ought to be null.
If this happens, please follow this procedure:
Set the response curve
(E)
of both channels to linear.
Plug 6 patch cables into all inputs, while leaving the other end of the cable unconnected. Hold the METER
button for 1s. The bargraphs show a “C” letter. The bargraphs are now calibrated.
(The bargraphs are still showing a “C” letter)
Connect the output of an oscillator to channel 1 input. Monitor the signal on channel 1 output and adjust
channel 1’s shape potentiometer until you reach a point where the faint signal you can hear (bleed)
disappears. The ideal position is the point at which the bleed just starts disappearing.
(The bargraphs still showing a “C” letter)
Same as step 2, but for channel 2. Once you are done, press any button to write the settings and leave
the calibration mode.
This product is covered by Mutable Instruments’ warranty, for one year following the date of manufacture.
This warranty covers any defect in the manufacturing of this product. This warranty does not cover any
damage or malfunction caused by incorrect use - such as, but not limited to, power cables connected
backwards, excessive voltage levels, or exposure to extreme temperature or moisture levels.
The warranty covers replacement or repair, as decided by Mutable Instruments. Please contact our
customer service ([email protected]) for a return authorization before sending the
module. The cost of sending a module back for servicing is paid for by the customer.
Mutable Instruments encourages modding and hacking, but we will not service modified units or provide
any assistance in the realization of mods.
Mutable Instruments | Streams
7 of 8
Содержание Streams
Страница 8: ...Mutable Instruments Streams 8 of 8...
