Refer to the following illustration and steps to connect your scanner.
1. Power off the computer and any connected devices (e.g., display monitor,
printer, modem, etc.).
2. Remove the computer housing.
3. Select an empty slot and remove its back plate.
4. Remove the PCI SCSI interface card
from the anti-static bag.
5. Insert the PCI SCSI interface card
firmly into the empty slot and
screw in the card’s metal plate.
NOTE:
Do not force the PCI SCSI
interface card into the slot at an
as you may cause damage to your
computer.
6. Attach one end of the included
scanner cable to the
SCSI
port at the back of the scanner
and tighten the retaining screws.
7. Connect the other end of the
scanner cable to the PCI SCSI
interface card (SCSI port) that
you just installed at the back of
the computer and tighten the
screws.
IMPORTANT:
Before continuing,
move the scanner’s carriage lock
switch (located on the side near
the rear of the scanner) to the
Unlock
position. Failure to do so
may cause damage to your
Power Cord
Receptacle
scanner’s scanning mechanism.
8. Connect the power cord to the scanner and plug it into an appropriate
power outlet. Turn on the power on/off switch of the scanner.
IMPORTANT:
Before continuing, lift the cover and wait for the scanning lamp
to light and move part way down the Scanner Glass.
Upon turning on power to the scanner, the Windows operating system would
automatically detect your scanner and update your system configuration.
Содержание ScanExpress 1200 FS
Страница 1: ......
