2. Installation and operation
1. Inspection
Remove the UPS from its packaging and inspect it for damage that
may have occurred during shipping. If any damage is discovered,
repack the unit and return it to the place of purchase.
2. Charging
This unit is shipped from the factory with its internal battery fully
charged, however, some charge may be lost during shipping and the
battery should be recharged prior to use. Plug the unit into an
appropriate power supply
then switch ON the UPS and allow the UPS
to charge fully by leaving it plugged in for at least 10 hours with no load
(no electrical devices such as computers, monitors, etc.) connected
3. Placement
Install the UPS unit in a protected environment that provides adequate
airflow around the unit, and is free from excessive dust, corrosive
fumes and conductive contaminants. Do not operate your UPS in an
environment where the ambient temperature or humidity is high.
