Mustek G-SMART G-SMART LCD, Руководство пользователя, Страница: 6 / 11

6
Functions and Modes
You can cycle through the modes by pressing MODE button. If your GSmart LCD is
not connected to a computer, you can only access the Recorder and Playback
Modes. If your GSmart LCD is connected to a computer, you can access the
additional two modes.
Power On
Power
Power On/Off
Press the Power Button to activate your GSmart LCD Digital Camera. Press it again
and hold about three seconds to turn this camera off. Using this camera is really
easy.
You can simply point and shoot. First, you have to make sure you are in the
Recorder Mode. Then use the LCD viewfinder to guide you. You can then press the
Shutter Button to take your first picture. That’s so easy.
Power Low
If your battery is about to run out, you will see a dead battery icon ( ) shown
on the top center of the LCD. Your camera will turn off itself in three minutes.
Recorder Mode
Playback Mode
Without USB connection
Mass Storage Mode
PC Camera Mode
With USB connection