![background image](http://html1.mh-extra.com/html/mustang-tattoo/vader/vader_quick-start-manual_1859652002.webp)
✓
It is necessary to use disposable cartridges. Before and after use, wipe the machine with a
disinfectant composition.
✓
Be sure to use barrier protection for the typewriter, power supply and clip-cord.
✓
During the session, always wear disposable gloves.
Preparation for work
Before starting operation, you must choose a pusher (5) (hard or soft), depending on the type of
work being performed, insert it into the hole of the drive unit (4) with a thickening outward,
press it with a finger until a tight fit, then turn the cartridge holder and install the cartridge.
Needle reach is adjusted by turning the holder counterclockwise - increasing the needle reach,
clockwise - reducing the needle departure.
Machine care
✓
Disinfection of the holder should be carried out in disposable gloves. Disconnect the machine
from the power supply before changing the cartridge.
✓
Troubleshooting and parts replacement is recommended to do in the service center. More
information about the service and maintenance can be found at https://mustang-tattoo.ru/.
During the warranty time, repair is free.
✓
Machine cannot be sterilized in an autoclave or a dry-heat oven!
Manufacturer's warranty
The warranty of the corpus (housing) is 5 years, of the working parts of the machine (engine,
internal mechanism, pusher, stopper-spring) is 1 year. Attention! The official guarantee becomes
active after registration on the site https://mustangtattoo.ru/guarantee/. You must register within
30 days of purchase. This warranty covers factory failures, but does not apply to wear and tear
on equipment and parts as a result of proper or improper use.
Warranty covers:
✓
RCA socket out of order;
✓
stripping of a screw or thread in the fastening elements of housings, motors and internal
mechanisms of rotary machine.
The warranty does not apply to equipment:
✓
suffered from aggressive non-alcoholic antiseptics;
✓
with signs of falling, strikes on the body and components;
✓
with traces of corrosion and processing;
✓
with signs of self-reconfiguration, modernization;
✓
if foreign bodies, liquids, dirt get into the mechanism.
And also the warranty is terminated in the event of:
✓
misuse of equipment;
✓
exceeding the maximum operating voltage;
✓
sterilization in an autoclave or dry heat oven.