Mustang Survival Sentinel Series, Руководство пользователя

Страница: 13 / 20

10
10. Ensure the waterproof relief zipper is completely closed and the
slider is fully engaged with the zipper stop. Stow the zipper
toggle in the yellow loop located under the zipper cover.
warninG: failure to completely close the waterproof
entry zipper and the relief zipper will result in leakage
of water inside the suit and reduction of survival time
when in the water. have a fellow team member double-
check each slide fastener to ensure they are completely
closed against their sealing plugs.
11. (MSD64X Series Only) Close the outer shell entry zipper. Reach
over your left shoulder with your right hand and grasp the zipper
toggle. While holding the top of the zipper, pull the toggle down
until the zipper is completely fastened.
12. Tighten the ankle Velcro
®
covers to a snug fit.
13. Burp the suit before water entry. Cross arms in front and gently
slide fingers between the neck seal and your neck, squat down
and force excess air through the neck opening.
Doffing the Dry Suit
1. Remove all equipment worn over the suit.
2. Thoroughly rinse down the exterior of the suit while wearing it,
paying special attention to the seals and zippers. Remove all dirt,
salt and debris.
3. Loosen Velcro
®
waist and ankle adjustment tabs.
4. Completely open the outer shell entry zipper and the inner
immersion layer waterproof zipper. If not completely open, the
zippers face the risk of being damaged during doffing.
caution: Placing undue force on the zipper may
damage the seal and harm the integrity of the suit.
never forcefully yank on the zipper.
5. Insert fingers between neck seal and neck. Gently stretch the seal
outward and upward while pulling neck seal over your head.
6. Remove hands from wrist seals by holding onto the cuff or pull
tab. Point your fingers straight, tucking the thumb underneath the
seal. Slowly pull your hand through the wrist seal. Do not make a
fist when putting your wrist through the seal or pull on the seal.