step 6
Take your electric firebox out of its packaging and position it between the 2 legs
of the mantel. Once you are close to the wall, plug the firebox into the nearest
outlet.
The firebox comes with 3 metal brackets and 20 black screws. These metal
brackets must be attached to both the sides of the firebox and the mantel to
ensure that your firebox does not move around as you use it. 2 of the brackets
have 2 large holes on one side. These large holes line up with 2 screws on the
side of the firebox. The other screws provided must be inserted into the holes at
the other end of the bracket and into the firebox. The other side of each bracket
attaches to the mantel.
The 3rd bracket has no holes on 1 side. That side should go up against the
firebox top but should not be attached as the heater sits right underneath the
bracket. Only the mantel side should be attached.
If you have any questions about the firebox please reference the installation
instructions that come with the firebox. Please reference the Quick Tips section
of that instruction manual.
step 7
You are now ready to position your mantel against the wall. This step requires 2
people to move the unit.
anti-tipping device
At this point you must attach the anti-tipping device to your mantel and your
wall. This device is a safety feature that will prevent your mantel from tipping
over if a weight is applied which can unbalance the unit.
Step 6
Step 7
3
