Muskoka Chair CEDAR series, Руководство по сборке

Страница: 2 / 32

Muskoka Chair Assembly Instructions
Tools Needed:
Cordless Drill
#2 Robertson Bit
9/16” Socket or Adjustable Wrench
Tips:
Separate all parts in kit box into five sections (as marked)
Section A
Rail Assembly 15 parts ¾” x 8” & 1” x 7½” ............................... Pages 1 - 5
14 parts ¾” x 5½”
Section B
Back Support Assembly, 5 parts ................................................. Pages 6 - 7
Section C
Chair Back Assembly, 10parts................................................... Pages 8 - 13
Section D
Arm and Front Leg Assembly, 8 parts ..................................... Pages 14 - 23
Section E
Front Plate “Install” Only, 1 part .......................................................Page 24
If all parts and hardware are accounted for, lets begin.
If not call 1-705-765-3836 for assistance.
Total = 39 Parts for ¾”x 8” & 1” x 7½”
38 Parts for ¾” x 5½”
66
(approx)
- 1½” Screws
2 - 2” Carraige Bolts
¾” x 5½” & ¾”x 8”
2 - 2½” Carraige Bolts
1” x 7½”
11 - 1½” Round Head Screws - USE ONLY for base strap (7) and rail assembly (4)
12 - 1¼” Screws USE ONLY for bottom back piece (4)
and for each arm assembly (4)
Section D
4 - 1½” hex head bolts
¾” x 5½” & ¾”x 8”
4 - 2” hex head bolts
1” x 7½”
6 nuts, 6 washers