musikelectronic geithain TS56KSP, Инструкция по установке и эксплуатации, Страница: 18 / 32

CONTROLS AND CONNECTIONS
16
musikelectronic geithain GmbH TS 56SP / TS 56KSP
Rotary encoder (1)
Controls the device and is used to navigate the menu and to set parameters (see chapter “8 Operation
and configuration of the device”, page 20).
LCD display (2)
A 2 × 20 digits display shows user interactions and status. During action it could be dimmed or even
shut down.
NEXT button (3)
Controls the device and is used to navigate the menu and to set parameters (see chapter “8 Operation
and configuration of the device”, page 20).
LED-level indicator (4)
Indicates the level on the device in case of limiting or clipping.
BACK button (5)
Controls the device and is used to navigate the menu and to set parameters (see chapter “8 Operation
and configuration of the device”, page 20).
USB port type B (6)
Used to configure the device with the software ME Geithain DSP Control.
Ethernet port 10/100 Mbit/s RJ45 (7)
Configuration interface for remote access with ME Geithain DSP Control through a standard TCP/IP
network.
LINE In-/Output XLR3 F/M (8)
Symmetrical in and / or output connectors, for input signals up to +6 dBu.
Fuse carrier (9)
Fine wire fuse with 6.3 A T, 6,3 × 32 mm, turn left to lock, turn right to release.
On/Off switch (10)
This switch disconnects mains and completely turns off the device.
Mains supply with Powercon In/Out (11)
Connection to mains and the possibility to power up another speaker with max. 15 A.