SET-UP THE SPEAKERS
10
musikelectronic geithain GmbH
ML 811K1
6
Set-up the speakers
In this chapter we inform you how to connect your speakers to mains and your signal source. Ensure
that the mains switch on the backside is in position “OFF”. Only when your speaker is completely
connected (see chapters 6.1
and 6.2) you can take the device into operation by use of the mains
switch.
The speaker can be connected to every common pre-amplifier (U
a
= 1 V ... 5 V; R
i
< 600 Ω).
6.1
Connecting the ML 811K1
The amplifier of the ML 811K1 is housed in a separate enclosure. Every amplifier is paired to exactly
one speaker by the same serial number. Ensure installation in pairs.
To connect the Speaker to the amplifier use only the shielded Speakon cable that is part of the
delivery contents!
Ensure that the latch snaps audibly in place in the sockets of the speaker and the amplifier by turning
the plug clockwise. Connect your signal source with the amplifier through the XLR socket.
To release the connector cable from the speaker and the amplifier
, slide the latch on top of the
connector back and turn the connector anticlockwise.