MUSICSON DP SYSTEMS, Руководство пользователя

Страница: 24 / 41

24
IMPORTANT! The manufacturer to obtain a linear response on the whole
system, as shown on the response curves, including the subwoofer response,
adjusts all gain levels.
2. - MUTE: This button mutes the low frequencies way. When pushed, the
low frequencies are completely eliminated and the LED next to the button
lights up.
3. - LIMITER (-20, -10, -5,0dB): This LED bar indicates the limiting
level of the bass channel. A normal working margin should make the –5 dB LED
light up or, in extreme cases, light up the red 0 dB LED occasionally. When
we
have reached this level, the limiter circuits are starting to work in
order to protect the speakers from power surges.
4. - LEVEL: This control adjusts the output gain for the mid frequency
way. Adjustable to values between –12 and +6 dB.
IMPORTANT! The manufacturer to obtain a linear response on the whole
system, as shown on the response curves, including the subwoofer response,
adjusts all gain levels.
5. - MUTE: This button mutes the mid frequencies way. When pushed, the
mid way is completely eliminated and the LED next to it lights up.
6. - LIMITER (-20, -10, -5,0dB): This LED bar indicates the limiting
level of the mid frequency channel. A normal working margin should make the
(–5)dB
LED light up or, in extreme cases, light up the red 0 dB LED
occasionally. When we have reached this level, the limiter circuits are
starting to work in order to protect the speakers from power surges.
7. - LEVEL: This control adjusts the output gain for the high frequency
way. Adjustable to values between –12 and +6 dB.
IMPORTANT! The manufacturer to obtain a linear response on the whole
system, as shown on the response curves, including the subwoofer response,
adjusts all gain levels.
8. - MUTE: This button mutes the high frequencies way. When pushed, the
high frequency way is completely eliminated and the LED next to it lights
up.
9. - LIMITER (-20, -10, -5,0dB): This LED bar indicates the limiting
level of the high frequencies channel. A normal working margin should make
the
–5 dB LED light up or, in extreme cases, light up the red 0 dB LED
occasionally. When we have reached this level, the limiter circuits are
starting to work in order to protect the speakers from power surges.
10. - HI-EQ: This control allows adjusting the response of the
compression driver within the highest frequencies. It can be adjusted
between 10 kHz and 20 kHz.
11. - ON: This LED indicates that the processor is turned ON.
12. - POWER: Mains switch of the processor.
ATTENTION! Inside these signal processors you can find a series of
adjustable components. It is of vital importance not to change the original
settings, since a modification of working thresholds or offset values of the