Musicom Lab EFX LITE 8, Руководство пользователя

Страница: 5 / 6

EFX LITE 8L Audio Controller User Manual 5
ྙG
Apply power while holding the MODE and P3 switches down.
ྚG The display will show 'n' or 'F' and the LED above P3 switch will flash. 'n' means On and 'F' means Off.
ྛG Press the P3 switch to turn Popping Noise Reduction Control on/off.
ྜG This setting will store into the EEPROM memory and the EFX LITE 8L Audio Controller will automatically
restart.
NOTE
- To use the Popping Noise Reduction Control, connect the MUTE OUT jack to the amplifier input jack. Refer
to the basic connection drawing on page 2.
- The initial default setting is 'n'
6. Initial Default Setting
The initial default setting for the EFX LITE 8L Audio Controller may be reset with the following procedure.
This procedure will erase all user data from the EEPROM memory.
ྙG Apply power while holding the P1 and P4 switches down.
ྚG The display will show 'd' and the LED above P1 switch will flash. 'd' means Default.
ྛG Press the P1 switch
ྜG When the initial default setting is successful, the EFX LITE 8L Audio Controller will automatically restart.
7. Specificati
on
- Buffer Input Impedance ............. 1 M ȳ
- Buffer Output Impedance .......... 100 ȳ
- Current Draw .......................... 180 mA (12VDC Center Negative)
- Dimensions .............................. 300(W) x 82(D) x 55(H) mm
11.8(W) x 3.2(D) x 2.2(H) inches
- Weight ................................... 770 g / 1.7 lb