Charging
Please charge the BT-X56 LED SoundBlaster fully with the
included USB-C charging cable before first use. Plug the
charging cable into the USB-C jack (9) of the speaker, and the
other end into a USB jack of a power-charger* (5V/2A
recommend, *not included).
The LED indicator will dynamically light up. It turns into static light
when it is fully charged. (We recommend to turn off the speaker
while charging, otherwise, it will take longer time). It is fully
charged after approximate 4 hours.
Warning:
The device does not have power bank function. It is
forbidden to charge other devices via this unit or to connect other
devices via a USB cable than USB flash drive. It can occur
unrepairable damage.
First use
Power on the device by press and hold the power on/off button
(1). A welcome tone sounds. To shut down the SoundBlaster
press again the power button. A good-bye tone sounds.
Modes
Bluetooth
After power on the LED SoundBlaster it is automatically in the
paring state (blinking power button). To pair the SoundBlaster
with your smartphone, tablet or PC, start the Bluetooth search
function on your device and connect it with “
MusicMan BT-X56
”.
The power button stops blinking and is in on state. The LED
SoundBlaster makes a tone once connected.
The SoundBlaster will automatically reconnect the last paired
device if it is reachable. It will shut down automatically after 5
minutes if no connection occurs.
