5
Toslink input of the MYDAC II. See each device’s instruction manual for
more connection information.
2.6) Windows Computer via USB, S/PDIF, or Toslink
Windows computer users should refer to the instructions for their
computer and/or sound card, as well as music library software setup to
interface with the MYDAC II. See the above connection notes for specific
connector access via the MYDAC II.
3.0) POWER SUPPLY
The MYDAC II wall-mount transformer connects to the power jack on the
rear of the unit and a wall outlet or power strip.
4.0) AUDIO OUTPUTS
Please make sure that the volume control on your receiver, integrated
amp, or pre-amp is turned completely down before plugging in the audio
connections. Using a high-quality stereo RCA to RCA interconnect cable,
connect the outputs of your MYDAC II to a line-level input of your
receiver, integrated amplifier, pre-amp, or headphone amplifier, noting
proper left and right channels.
5.0) AUDIO CHASSIS PLACEMENT
The MYDAC II may be placed on a separate shelf in your audio rack, or
on top of another source or line-level component. Please make sure that
ventilation to the unit is not restricted, and the unit is away from magnetic
fields or noise from other components’ motors, transformers or displays.
6.0) USING YOUR MYDAC II
If you have followed the above instructions, your MYDAC II is ready to
play music. Chose your favorite track, select the correct input on your
receiver, integrated amp or pre-amp, and slowly bring up the volume level.
Then sit back and enjoy the music.
6.1) Absolute Phase Switching
To invert absolute phase, hold the selected input button for 3 seconds, the
indicator LED will go dark, indicating that the audio signal is now reverse
phase. To return to non-inverted absolute phase, hold the appropriate
input selector for 1 second. NOTE: You must be in non-inverted absolute
phase to select another input.
