X-T100
INSTALLATION
Issue 4: 2
nd
October 2006
INTRODUCTION
Congratulations on the purchase of your new X-T100
integrated amplifier.
The X-T100 is a compact integrated amplifier which
encloses the best elements out of our separates into one
convenient box. Its case design complements the X-
V8
series components which include a DAB/FM tuner and
CD player all in the same convenient size.
The preamplifier sections are our finely tuned and
tweaked tube input line level preamplifier for smooth
tube sound coupled with low noise and virtually no
distortion. This also includes our top quality low noise
phono stage which caters for MM cartridge users.
The power amplifier consists of two amplifier modules
with generously rated supplies for the absolute best in
separation and imaging. Rated at 50W, they are enough to
drive most loudspeakers with ease, thanks to the high
current capacity of the output stage. Low distortion and
very quiet they will deliver all music types exactly as the
artist originally intended.
The resultant performance achieved by this unit is among
the best in the world. It has excellent signal to noise
ratio, low distortion, wide bandwidth, great dynamic
range, extraordinary resolution and fine detail.
UPGRADE PATH
Early in 2007 two interesting new X-
V8
series products
are coming.
- The TRIPLE-X170 PSU is an upgrade Power Supply
Unit. It increases the power of your X-T100 to 85+85
wpc and improves its peak current. The TRIPLE-X170
PSU will power the X-T100, X-RAY
V8
and X-PLORA
V8
simultaneously. Any product connected to it will sound
better.
- The X-DAC
V8
is a super-performance Digital to
Analogue Converter with a tube output. Its performance
is verging on state-of-the-art and sounds extraordinary.
The X-DAC
V8
is self-powered and also has power supply
outlets for the X-RAY
V8
and X-PLORA
V8
. When the X-
RAY
V8
is paired with the X-DAC
V8
, what you have is a
mini KW25 system (the KW25 Transport/DAC received
incredible reviews which recon it’s probably the best CD
player ever).
INSTALLATION
Position the X-T100 on a stable, horizontal surface where
there is no risk of it being knocked, or subjected to vibration
such as from loudspeakers.
INPUT CONNECTIONS
Phono:
The X-T100 has a pair of RCA type phono input sockets
intended for use with moving magnet (MM) pickups. Some
turntable/pickup arm combinations are fitted with an extra
wire for chassis earth. This should be connected to the earth
terminal on the back panel.
Line level inputs:
The unit also has three stereo pairs of RCA “line level” input
sockets controlled by the internal volume setting.
They have the same input sensitivity, and are suitable for use
with any source component having a line output of about
200-400mV nominal. The three pairs of sockets on the rear
panel are marked
AUX1, AUX2, AUX3,
corresponding with
function selector buttons on the front panel. The
AUX1
input
sockets on the back share the same input as the PDI input
jack at the front.
Do not
connect devices to both the
AUX1
inputs and PDI
simultaneously. Please see note P.8
OUTPUT CONNECTIONS
Speakers:
Connect your loudspeakers to the terminals on the
back panel marked as
LEFT
and
RIGHT SPEAKER
outputs. Make sure both speakers are connected with the
same polarity.
PRE-:
The X-T100 has its pre-amplifier output available
from RCA sockets on the back panel marked
PRE-OUT
,
and is controlled by the volume adjustment.
This is to allow “bi-amplification” using suitable external
amplifiers and crossover networks to power the speaker
drive components separately, giving noticeable improvement
in clarity, imaging and bass weight. Typically the X-T100
speaker outputs may be used to drive the speaker’s “tweeter”
(high audio frequencies), and an external higher power stereo
amplifier(s) could drive the “woofer” (low frequencies).
TAPE:
Tape outputs of nominal line level and are constant
volume for recording to tape, CD-R/RW, or any other
recordable format. The tape deck's line inputs are connected
to the units’
TAPE OUT
sockets to record the material
being listened to. The line outs from the tape deck should be
connected to an unused
AUX
input on the XT-100.
POWER CONNECTION
The power lead should be connected to a
Musical Fidelity
power supply unit designed for this product, such as the
TRIPLE-X
(supplied with the XT-100). The connector from
this amplifier mates with the 6-way socket labelled
X-T100
on the rear of the power supply unit. The connector should
fit comfortably with a small click when properly seated.
Do
not force the connector.
CLEANING
Before cleaning the unit, switch off power at the mains
switch and remove the mains plug from the wall socket.
Clean the cabinet and remote control unit using a moist
cloth. We do not advise using solvents, white spirit or
thinners as they could damage the surface finish.
Page 5
of
11
