Instructions For Use. Page 4
X-A2
INSTALLATION
INSTALLATION PRECAUTIONS
Your new X-A2 is designed and built to provide trouble-free performance but as
with all electronic devices it is necessary to observe a few precautions. Please ensure
that you have complied with them before you connect any AC power to your ampli-
fier. Retain this guide for future reference.
þ
Heed all warnings on the back of
the unit.
þ
þ
Place your X-A2 where there is
adequate ventilation.
þ
þ
Only connect the unit to a power
supply of the type marked on the back
of the unit.
þ
þ
Position the power supply lead
and signal interconnect leads where
they are not likely to be walked on or
trapped by items placed on them.
ý
ý
Do not use near water.
ý
ý
Do not place the amplifier near
direct heat sources such as radiators
or other equipment that produces
heat.
ý
ý
Do not remove any covers or try
to gain access to the inside. The war-
ranty will be invalid if the unit has
been tampered with. There are no
user adjustments within. Refer all
service work to an authorised Musical
Fidelity agent.
ý
ý
There are fuses in the X-A2. In
the unlikely event that one blows, take
your X-A2 to your audio dealer. Do
NOT try to replace the fuse yourself
or you will invalidate the warranty.
BEFORE YOU SWITCH ON
You should make all connections to the X-A2 before switching on.
Follow this routine before you listen for the first time, and each time you change any
connections.
1
Check all the inputs and outputs to the X-A2.
2
Then check again.
3
Turn the volume control to nil.
4
Now you can switch on the power and carefully advance the volume to
the level you want and enjoy the music.
