Musical Fidelity NU-VISTA Series, Руководство по установке

Страница: 6 / 17

P a g e 5
Installation, Precautions & User Information
This new Nu-Vista PRE is designed and built to provide trouble-free performance, but as with all electronic
devices it is necessary to observe a few precautions:
• Heed all warnings shown on the back of the product.
• Only connect the Nu-Vista PRE to a mains outlet having the same voltage as marked at the back of the
unit.
• Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is
switched off.
• Position the mains lead and signal interconnects where they are not likely to be walked on or trapped by
items placed on them.
• Do not use near water, or place water-filled containers on the Nu-Vista PRE & PRE PSU, for example, a
flower vase or potted plants. If water does spill inside, immediately pull out the mains plug from the
wall socket and inform your dealer, who should then check the unit before further use. Entry of
liquid into the Nu-Vista PRE
and PRE PSU is dangerous, and may cause electric shock or fire
hazard.
• Do not place the unit near direct heat sources such as radiators, direct sunlight or other equipment.
• Do not remove any covers or try to gain access to the inside. There are no internal adjustments or fuses
you can replace yourself. Refer all service work to an authorised Musical Fidelity agent.
* Note: Unauthorised opening of the equipment will invalidate any warranty claim.
• Dust regularly with a soft cloth or soft brush but be careful when using cleaning or polishing agents - they
may harm the surface finish.
The electronics in modern hi-fi equipment is complex and may, therefore, be adversely affected or damaged
by lightning. For protection of the audio system during electrical storms, remove the mains plugs.
If after-sales service is required, to help the dealer identify the Nu-Vista PRE & PRE PSU please quote the
serial number located on the rear panel of the unit.
GENERAL ADVICE