OPERATION
Nu-Vista M
3
Instructions for Use. Page 7 of 10
BEFORE YOU SWITCH ON
You should make all connections to the
Nu-Vista M
3
before switching on.
Follow this routine before you listen for
the first time, and each time you change
any connections.
1
Check all the input and output con-
nections to and from the Nu-Vista
M
3
.
2
Then check again.
3
Turn the volume control to
minimum.
SWITCHTING ON
1
Now you can switch on the power
using the mains switch situated on
the front of the PSU. There are
heavy duty relays in the PSU and
when the unit is first turned on these
will operate.
2
All 4 PSU LEDs should light on the
amplifier’s front panel.
If for any reason one of the LEDs
does not light, switch the unit off and
check the connecting leads between
the PSU and the amplifier.
3
After approx. 20 seconds the
Nuvistas will have heated up and the
mute will switch off automatically.
4
You can now and carefully advance
the volume to the level you want and
enjoy the music.
issue 1/26.10.2000
REMOTE CONTROL
The Nu-Vista M
3
features Infra Red
remote control of volume, input selection
and mute functions via the supplied remote
control handset. The Infra Red receiver is
the small red lens marked I.R.Receiver. sit-
uated on the front panel. It is important to
ensure that when operating the remote con-
trol, the line-of-sight from the remote to
the infra red receiver is not obstructed.
Pressing the volume up or down buttons on
the remote handset will advance the
motorised volume control in the desired
direction.
Input selection can also be controlled with
the remote handset.
Pressing the mute button on the remote
handset mutes the output. Press the mute
button again to switch the mute off.
