Issue 1
Page 4 of
13
Installation precautions & user information
This new M8xi Integrated Amplifier is designed and built to provide trouble-free performance, but as with all
electronic devices it is necessary to observe a few precautions:
• This unit features a BRIDGED speaker output and should NOT be grounded on either speaker output
terminal as both terminals are effectively “hot”, i.e. carrying high current signals. Please check if using any
active “sub”, electrostatic, or other non-standard speaker types or configurations (that could be potentially
grounded) with the M8xi. Take special care when bi-amping that the speaker high and low frequency
elements within speaker are completely isolated before switching on power. Consult speaker manual or
manufacturer, if there is any doubt.
• Heed all warnings shown on the back of the product.
• Only connect the M8xi to a mains outlet having the same voltage as marked at the back of the unit.
• Always ensure that when disconnecting and reconnecting your audio equipment the mains supply is
switched off.
• Position the mains lead and signal interconnects where they are not likely to be walked on or trapped by
items placed on them.
• Do not use near water, or place water-filled containers on the M8xi, for example, a flower vase or potted
plants.
If water does spill inside, immediately pull out the mains plug from the wall socket and inform
your dealer, who should then check the unit before further use. Entry of liquid into the M8xi is
dangerous and may cause electric shock or fire hazard.
• Do not place the unit near direct heat sources such as radiators, direct sunlight or other equipment.
• Do not remove any covers or try to gain access to the inside. There are no internal adjustments or fuses you
can replace yourself. Refer all service work to an authorised Musical Fidelity agent.
* Note: Unauthorised opening of the equipment will invalidate any warranty claim.
• Dust regularly with a soft cloth or soft brush but be careful when using cleaning or polishing agents - they
may harm the surface finish. Before cleaning the unit, switch off power at the mains switch and remove the
mains plug from the wall socket.
The electronics in modern hi-fi equipment is complex and may, therefore, be adversely affected or damaged by
lightning. For protection of the audio system during electrical storms, remove the mains plugs.
If after-sales service is required, to help the dealer identify the M8xi please quote the serial number located on
the rear panel of the unit.
GENERAL ADVICE
